Concrete Equipment

The Mikasa GS-28/6 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-28/6 has a 6 Meter Rubber Hose with a Vibration Head of 28 Milimiters and Vibrating Head Length of 477 Milimeters

The Mikasa GS-38/10 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-38/10 has a 10 Meter Rubber Hose with a Vibration Head of 38 Milimiters and Vibrating Head Length of 480 Milimeters

The Mikasa GS-38/6 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-38/6 has a 6 Meter Rubber Hose with a Vibration Head of 38 Milimiters and Vibrating Head Length of 480 Milimeters

The Mikasa GS-45/10 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-45/10 has a 10 Meter Rubber Hose with a Vibration Head of 45 Milimiters and Vibrating Head Length of 494 Milimeters

The Mikasa GS-45/12 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-45/12 has a 12 Meter Rubber Hose with a Vibration Head of 45 Milimiters and Vibrating Head Length of 494 Milimeters

The Mikasa GS-45/6 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-45/6 has a 6 Meter Rubber Hose with a Vibration Head of 45 Milimiters and Vibrating Head Length of 494 Milimeters

The Mikasa GS-60/12 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-60/12 has a 12 Meter Rubber Hose with a Vibration Head of 60 Milimiters and Vibrating Head Length of 479 Milimeters

The Mikasa GS-60/6 is a Concrete Vibrating Shaft

It Features an Inner Shaft Made from Heavy-Duty Steel Wires, and a Torque Resistant Outer Hose

The Mikasa GS-60/6 has a 6 Meter Rubber Hose with a Vibration Head of 60 Milimiters and Vibrating Head Length of 479 Milimeters

The Mikasa MPT-36BY is a Diesel Concrete Power Trowel Used for Concrete Finishing Works Such as Smoothing Concrete Floors

The MPTY Series Runs on a 4.6 Horsepower Yanmar Diesel Engine (L48N)

It Features a Four-Blade Set, a Diameter of 910 Milimeter and Speed between 50 to 100rpm

The Mikasa MPT-36BM is a Petrol Concrete Power Trowel Used for Concrete Finishing Works Such as Smoothing Concrete Floors

The MPTM Series Runs on a 6 Horsepower Mitsubishi Petrol Engine (GB18GPN)

It Features a Four-Blade Set, a Diameter of 910 Milimeter and Speed Between 50 to 100rpm

The OLI CMM-15 is a Frequency and Voltage Converter Equipped with Permanent Magnets

It is Used to Power High Frequency Concrete Vibrators Continuously

The OLI CMM-15 has One Outlet Providing 1 kVA of Maximum Power and Maximum Current of 14 Amperes

The OLI CMM-25 is a Frequency and Voltage Converter Equipped with Permanent Magnets

It is Used to Power High Frequency Concrete Vibrators Continuously

The OLI CMM-25 has Two Outlets Each Providing 1.8 kVA of Maximum Power and Maximum Current of 25 Amperes

The OLI VHP-50 is an Electric High Frequency Internal Vibrator Used to Obtain Compact and Resistant Concrete

The VHP-50 has a Tube Diameter of 50 Milimeters and a Centrifugal Force of 3,760 Newtons

The Paclite VP-45 is a Pneumatic Poker Vibrator with In-Line Oiler for Permanent Lubrication and Heavy-Duty Steel Head

It is Used for all Types of Concrete, from Small Foundations to Large Commercial Structures

The VP-45 has a Tube Diameter of 47 Millimeters and a Centrifugal force of 3,800 Newtons

The Paclite VP-55 is a Pneumatic Poker Vibrator with In-Line Oiler for Permanent Lubrication and Heavy-Duty Steel Head

It is Used for all Types of Concrete, from Small Foundations to Large Commercial Structures

The VP-55 has a Tube Diameter of 56 Millimeters and a Centrifugal force of 6,600 Newtons

The Paclite VP-65 is a Pneumatic Poker Vibrator with In-Line Oiler for Permanent Lubrication and Heavy-Duty Steel Head

It is Used for all Types of Concrete, from Small Foundations to Large Commercial Structures

The VP-65 has a Tube Diameter of 67 Millimeters and a Centrifugal force of 11,300 Newtons

The Sirl BP200 is an Electric Towable Concrete Mixer with Reinforced Mouth and Two Double Mixing Blades and Heavy-Duty Epoxy Paint

It has a Maximum Capacity of 190 Liters and Rotation Speed of 28rpm

The Sirl BP-400SR is an Electric Towable Concrete Mixer with Reinforced Mouth and Three Double Mixing Blades and Heavy-Duty Epoxy Paint

It has a Maximum Capacity of 350 Liters and Rotation Speed of 35rpm

The Sirl BP-500SR is a Diesel Towable Concrete Mixer with Reinforced Mouth and Three Double Mixing Blades and Heavy-Duty Epoxy Paint

It has a Maximum Capacity of 450 Liters and Rotation Speed of 25rpm

Powered by a 4.7 Horsepower Yanmar Diesel Engine (L48N)

The Sirl BP-500SR is an Electric Towable Concrete Mixer with Reinforced Mouth and Three Double Mixing Blades and Heavy-Duty Epoxy Paint

It has a Maximum Capacity of 450 Liters and Rotation Speed of 25rpm

The Toku TKPT-36A is a Concrete Power Trowel Used for Concrete Finishing Works Such as Smoothing Concrete Floors

The Toku TKPT-36A Runs on a 6 Horsepower Mitsubishi Petrol Engine (GB18GPN)

It Features a Four-Blade Set, a diameter of 910 Milimeter and speed between 50 to 100rpm

The Trelawny A45 is an Industrial Vaccum Cleaner

It is Used for General Dust Cleaning and Can be Attached to Trelawny Grinders and Floor Scabbler for Optimum Dust Collection

The Trelawny A45 has Three Single Phase Electric Motors with Total Output Power of 4.6 Horsepower and Total Capacity of 60 Liters

The Trelawny MHS11 is an 11 Head Pneumatic Concrete Floor Scabbler

It is Used for Laitance and Roughening Removal, Coating Removal and Surface Preparation

The Trelawny MHS11 Provide a 285 Milimeters Cutting Width with Air Consumption of 55 CFM

The MSH11 Features an 11 Replaceable Carbide Tipped Scabbling Heads for Fast Production and Long Service Life

The Trelawny TCG-250 is a Single Head Grinder Fitted with Diamond Disc

It is used for Leveling High Spots, Coating and Adhesives Removal and Concrete Repair

The Trelawny TCG-250 has an Electrical Motor Output of 3 Horsepower Providing a Grinding Diameter of 250 Milimeters and Disk Speed of 1,385rpm