Construction Equipment

The Battipav Expert 600 is a Masonry Table Saw Used for Cutting Bricks, Blocks and Marble Blocks

It is Equipped with 5.5 Horsepower Electric Motor with Thermal Protection

The Expert 600 is Built to Work with 600 Millimeter Blade Disk Providing Maximum Cutting Thickness of 220 Millimeters and Maximum Cutting Length of 750 Millimeters

The Battipav Prime 150 is a Single-Phase Masonry Bridge Saw Used for Cutting Bricks, Stones, Granite and Marble Slabs

It is Equipped with 3 Horsepower Electric Motor with Thermal Protection

The Battipav Prime 150 is Built to Work with 350 Millimeter Blade Disk Providing Maximum Cutting Thickness of 110 Millimeters and Maximum Cutting Length of 1,500 Millimeters

The Battipav Prime 200 is a Single-Phase Masonry Bridge Saw Used for Cutting Bricks, Stones, Granite and Marble Slabs

It is Equipped with 3 Horsepower Electric Motor with Thermal Protection

The Battipav Prime 200 is Built to Work with 350 Millimeter Blade Disk Providing Maximum Cutting Thickness of 110 Millimeters and Maximum Cutting Length of 2,000 Millimeters

The Marcital BSC350 Circular Saw Bench Comes with a Fixed Bench, Height-Adjustable Blade and Bench Extension for Supporting Longer Pieces of Wood

It Features a Blade Size of 350 Millimeters and Maximum Cutting Height of 120 Millimeters

The Marcital C38 EVO is a Cutting Machine, Complete with set of Blades Used for Rebar Cutting Works

The Marcital C44 EVO has a Three-Phase Electric Motor with Maximum Output of 3 kW Providing 49 rpm Gear Speed and Maximum Cutting Bar Diameter of 35 Millimeters

The Marcital C44 EVO is a Cutting Machine, Complete with set of Blades Used for Rebar Cutting Works

The Marcital C44 EVO has a Three-Phase Electric Motor with Maximum Output of 3 kW Providing 49 rpm Gear Speed and Maximum Cutting Bar Diameter of 35 Millimeters

The Marcital C54 EVO is a Cutting Machine, Complete with set of Blades Used for Rebar Cutting Works

The Marcital C54 EVO has a Three-Phase Electric Motor with Maximum Output of 4 kW Providing 37 rpm Gear Speed and Maximum Cutting Bar Diameter of 46 Millimeters

The Marcital P38 is a Heavy-Duty Bending Machine

It is Used Mainly for Rebar Bending Works

The Marcital P38 has a Three-Phase Electric Motor with Maximum Output of 3 kW Providing 9 rpm Gear Speed and Maximum Bar Bending Diameter of 32 Millimeters

The Marcital P42 is a Heavy-Duty Bending Machine

It is Used Mainly for Rebar Bending Works

The Marcital P42 has a Three-Phase Electric Motor with Maximum Output of 3 kW Providing 6 rpm Gear Speed and Maximum Bar Bending Diameter of 36 Millimeters

The Marcital P52 is a Heavy-Duty Bending Machine

It is Used mainly for Rebar Bending Works

The Mikasa MRH-700SCB is a Double Drum Walk-Behind Vibratory Roller

It is Used for Compacting Paving Material suck as Asphalt and Roller Compacted Concrete

The Mikasa MRH-700SCB is Powered with a 10 Horsepower Yanmar Diesel Engine (L100N) and Features a Steel Drum with a Diameter of 406 Millimeters and Width of 650 Millimeters.

The Exciting Force Can Go Up to 23.5kN with Vibrating Frequency of 55Hz

The Mikasa MRH-900DSY is a Fully Hydraulic Walk-Behind Double Steel Drum Vibration Roller

It is used for Road Repairing Works and General Construction

The Mikasa MRH-900DSY is Powered by a 10 Horsepower Yanmar Diesel Engine (L100N) with an Centrifugal Force of 16.8kN and a Drum Width of 650 Millimeters

The Mikasa MTX-85DY is a Heavy Duty Tamping Rammer used for Road Repairing Works and General Construction

It is powered with a 4.7 Horsepower Yanmar Diesel Engine (L48N)

The Mikasa MTX-85DY has a Heavy-Duty Steel Tamping Plate Providing an Impact Force of 1,600kgf

The Mikasa MVC-90 is a Vibratory Plate Compactor, Used mainly to Compact Sand and Gravel Soils

It has a 4.6 Horsepower Yanmar Diesel Engine (L48N) with a Plate size of 550x505mm Providing a Centrifugal Force of 15kN and a Vibration Frequency of 100Hz

The Mikasa MVC-90 is a Vibratory Plate Compactor, Used mainly to Compact Sand and Gravel Soils

It has a 6 Horsepower Mitsubishi Petrol Engine (GB18GPN)

The Mikasa MVC-90 has a Plate size of 550x505 Providing a Centrifugal Force of 15 kN and a Vibration Frequency of 100Hz

The Roadway RWYL51CS is a Ride-On Double Drum Vibratory Roller with Edge Cutting/Edge Pressing.

It is Used for Compacting Paving Material such as Asphalt and Roller Compacted Concrete

The Roadway RWYL51CS is Powered with a 25 Horsepower Yanmar Diesel Engine (3TNV76) with a Drum Diameter of 560mm and Width of 900mm and an Exciting force of 25kN

The Roadway RWTL33C is a Double Drum Walk-Behind Vibratory Roller

It is Used for Compacting Paving Material suck as Asphalt and Roller Compacted Concrete

The Roadway RWTL33C is Powered with a 10 Horsepower Yanmar Diesel Engine (L100N) with a Compaction Capacity of 1,950m²/h and an Exciting force of 17kNM

The Roadway RWTL35C is a Double Drum Walk-Behind Vibratory Roller

It is Used for Compacting Paving Material suck as Asphalt and Roller Compacted Concrete

The Roadway RWTL35C is Powered with a 10 Horsepower Yanmar Diesel Engine (L100N) with a Compaction Capacity of 2,000m²/h and an Exciting force of 20kN

The Roadway RWYL51BC is a Ride-On Double Drum Vibratory Roller

It is Used for Compacting Paving Material such as Asphalt and Roller Compacted Concrete

The Roadway RWYL51BC is Powered with a 25 Horsepower Yanmar Diesel Engine (3TNV76) with a Drum Diameter of 560mm and Width of 900mm and an Exciting force of 50kN

The Sima Dakar Mekano is a Single-Phase Masonry Saw Used for Cutting Bricks, Stones, Granite and Marble Slabs

It is Equipped with 3 Horsepower Electric Motor with Thermal Protection

The Sima Dakar Mekano Provides Maximum Cutting Thickness of 100 Millimeters and Maximum Cutting Length of 650 Millimeters

The Sima Spada Mekano is a Three-Phase Masonry Chainsaw Used for Cutting Bricks, Stones, Granite and Marble Slabs

It is Equipped with 4 Horsepower Electric Motor with Thermal Protection

The Spada 40 Mekano Provides a Maximum Cutting Thickness of 340 Millimeters and Maximum Cutting Length of 820 Millimeters

The Sima Trencher 2583 is a Double Blade Asphalt/Concrete Cutter Used to Perform Two Parallel Cuts to Be Excavated

The Sima Trencher 2583 is Powered by a 13 Horsepower Mitsubishi Petrol Engine (GM401) Providing Maximum Cutting Depth of 120 Millimeters with a 400 Millimeter Blade Diameter

The Toku TK-72B is a Heavy Duty Tamping Rammer used for Road Repairing Works and General Construction

It is powered with a 3.8 Horsepower Robin Petrol Engine (EH12D)

The Toku TK-72B has a Heavy-Duty Steel Tamping Plate Providing and Impact Force between 1,400 to 1,600kgf

The Toku TKC-350 is Heavy Duty Concrete Cutter.

It is Used for Concrete/Asphalt Road and Surface Cutting

The Toku TKC-350 is Powered by Mitsubishi Petrol Engine (GB400) Providing Maximum Output of 13 Horsepower and has a blade size between 12 to 16 Inch with Maximum Cutting Depth of 150 Millimeters