Pumps

The Zenit GR BluePro 200/2/G40H is a Three-Phase Submersible Grinder Pump

It is Mainly Used for Sewage and Wastewater Treatment Systems, Agriculture, Farming and Irrigation

It Features a Cast Iron Impeller and Casing with Double Mechanical Seal with an Electric Motor Output of 2 Horsepower Providing Maximum Head of 27 Meters and Maximum Capacity of 336 Liters per Minute

The Zenit DG 75/2M50 is a Stainless-Steel Single-Phase Submersible Pump

It is Used for Pumping-Out Flooding Premises and Pumping From Wells or Tanks

The Zenit DG 75/2M50 has a 1 Horsepower Electric Motor That Can Provide a Maximum Head of 9.5 Meters and a Maximum Capacity of 360 Liters per Minute

The Yanmar YDP40TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40TN has Maximum Power Output of 10 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,750 Liters per Minute

The Yanmar YDP40STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40STN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,300 Liters per Minute

The Yanmar YDP30TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30TN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 27 Meters and Maximum Capacity of 1,150 Liters per Minute

The Yanmar YDP30STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30STN has Maximum Power Output of 4.7 Horsepower Providing Total Head of 23 Meters and Maximum Capacity of 850 Liters per Minute

The Wilson WSPS-2VOR is a Single-Phase Submersible Vortex Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

SKT13297

The Wilson WSPS-2CB is a Single-Phase Submersible Grinder Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Sewage and Waste Water Carrying Foreign Matters and Can Withstand Temperatures Up to +40 °C

The Wilson WSPS-2CB has a Power Output of 2 Horsepower Providing a Maximum Head of 11.5 Meters and a Maximum Capacity of 350 Liters per Minute

SKT13298

The Wilson WSPD-1.5DR is a Single-Phase Submersible Drainage Pump

It Features a Housing, an Impeller and a Shaft All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

The Wilson WSPD-1.5DR a Power Output of 1.5 Horsepower Providing a Maximum Head of 13.5 Meters and a Maximum Capacity of 350 Liters per Minute

SKT13296

The Wilson WPC-50 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WPC-50 has a Power Output of 0.5 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 35 Liters per Minute

SKT13265

The Wilson WM(S)H4-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-40 has a Power Output of 1 Horsepower a Maximum Head of 36 Meters and a Maximum Capacity of 117 Liters per Minute

SKT13254

The Wilson WM(S)H4-30 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-30 has a Power Output of 1 Horsepower a Maximum Head of 27 Meters and a Maximum Capacity of 116.6 Liters per Minute

SKT13256

The Wilson WM(S)H2-60 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-60 has a Power Output of 1 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 58 Liters per Minute

SKT13258

The Wilson WM(S)H2-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-30 has a Power Output of 0.75 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 58 Liters per Minute

SKT13260

The Wilson WCPC-200 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-200 has a Power Output of 2 Horsepower Providing a Maximum Head of 45 Meters and a Maximum Capacity of 135 Liters per Minute

SKT13273

The Wilson WCPC-150 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-150 has a Power Output of 1.5 Horsepower Providing a Maximum Head of 38 Meters and a Maximum Capacity of 120 Liters per Minute

SKT13271

The Wilson WCIR25-6 is a Single-Phase Stainless-Steel Circulation Pump

It is Used for Hot/Cold Water Circulation, Air-Conditioning, Pool & SPA Systems

It has a Power Output of 93 W a Maximum Head of 6 Meters and a Maximum Capacity of 55 Liters per Minute

SKT13295

The Wilson PR-Matic One is a Regulation Device for Pump Control

It is Used for Water Supply, Increase of Network Pressure, Protection Against Pump Dry Running

SKT13341

The Varisco 150 WLP250 is a Trailer Mounted Diesel Self-Priming Centrifugal Pump

It is Used in Construction, General Dewatering, Drainage, Emergency Applications and Pumping-Out Flooding Premises

The Varisco 150 WLP250 is Powered by a 30 Horsepower Kirloskar Diesel Engine Which Provides a Maximum Head of 27.5 Meters and Maximum Capacity of 1,500 Gallon Per Minute

The Varisco 150 DP250 is a Trailer Mounted Wellpoint Centrifugal Pump

It is Used in Construction, General Dewatering, Drainage, Emergency Applications and Pumping-Out Flooding Premises

The Varisco 150 DP250 is Powered by a 30 Horsepower Kirloskar Diesel Engine Which Provides a Maximum Head of 30 Meters and Maximum Capacity of 2,100 Gallon Per Minute

Tsurumi NKZ-D3 is a Three-Phase Agitator Pump That is Mainly Used in Construction, Aggregation and Mining Applications.

The NKZ-D3 has a Power Output of 5 Horsepower That Provides a Maximum Head of 17 Meters and a Maximum Capacity of 1,540 Liters per Minute with a 3 Inch Discharge Connection.

Tsurumi NK4-22 is a Single-Phase Semi-Vortex Dewatering Pump That is Mainly Used in Construction, Aggregation and Mining Applications.

The NK4-22 has a Power Output of 3 Horsepower That Provides a Maximum Head of 26 Meters and a Maximum Capacity of 490 Liters per Minute with a 3 Inch Discharge Connection.

The Tsurumi KTZ 67.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 67.5 Offers a 50 Meters Submersion Depth with a 10 Horsepower Electric Motor That Provides a Maximum Head of 31 Meters and a Maximum Capacity of 2,040 Liters per Minute

The Tsurumi KTZ 615 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 615 Offers a 50 Meters Submersion Depth with a 20 Horsepower Electric Motor That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 2,800 Liters per Minute

The Tsurumi KTZ 611 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 611 Offers a 50 Meters Submersion Depth with a 15 Horsepower Electric Motor That Provides a Maximum Head of 32.5 Meters and a Maximum Capacity of 2,440 Liters per Minute

The Tsurumi KTZ 47.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 47.5 Offers a 50 Meters Submersion Depth with a 10 Horsepower Electric Motor That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 1,400 Liters per Minute

The Tsurumi KTZ 43.7 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 43.7 Offers a 50 Meters Submersion Depth with a 5 Horsepower Electric Motor That Provides a Maximum Head of 18 Meters and a Maximum Capacity of 1,450 Liters per Minute

The Tsurumi KTZ 415 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 415 Offers a 50 Meters Submersion Depth with a 20 Horsepower Electric Motor That Provides a Maximum Head of 55 Meters and a Maximum Capacity of 2,000 Liters per Minute

The Tsurumi KTZ 411 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 411 Offers a 50 Meters Submersion Depth with a 15 Horsepower Electric Motor That Provides a Maximum Head of 49 Meters and a Maximum Capacity of 1,450 Liters per Minute

The Tsurumi KTZ 35.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 3 Inch Discharge Connection

The KTZ 35.5 Offers a 50 Meters Submersion Depth with a 7.5 Horsepower Electric Motor That Provides a Maximum Head of 32 Meters and a Maximum Capacity of 1,100 Liters per Minute

Tsurumi KTZ 35.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and High Chromium Iron Impeller.

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5 mm Solid Handling Capabilities and 3 Inch Discharge Connection.

The KTZ 35.5 has a Power Output of 7.5 Horsepower That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 870 Liters per Minute

The Tsurumi KTZ 33.7 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 3 Inch Discharge Connection

The KTZ 33.7 Offers a 50 Meters Submersion Depth with a 5 Horsepower Electric Motor That Provides a Maximum Head of 29 Meters and a Maximum Capacity of 900 Liters per Minute