Pumps

The Wilson WPC-50 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WPC-50 has a Power Output of 0.5 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 35 Liters per Minute

SKT13265

The Wilson WSPD-1.5DR is a Single-Phase Submersible Drainage Pump

It Features a Housing, an Impeller and a Shaft All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

The Wilson WSPD-1.5DR a Power Output of 1.5 Horsepower Providing a Maximum Head of 13.5 Meters and a Maximum Capacity of 350 Liters per Minute

SKT13296

The Wilson WSPS-2CB is a Single-Phase Submersible Grinder Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Sewage and Waste Water Carrying Foreign Matters and Can Withstand Temperatures Up to +40 °C

The Wilson WSPS-2CB has a Power Output of 2 Horsepower Providing a Maximum Head of 11.5 Meters and a Maximum Capacity of 350 Liters per Minute

SKT13298

The Wilson WSPS-2VOR is a Single-Phase Submersible Vortex Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

SKT13297

The Yanmar YDP30STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30STN has Maximum Power Output of 4.7 Horsepower Providing Total Head of 23 Meters and Maximum Capacity of 850 Liters per Minute

The Yanmar YDP30TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30TN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 27 Meters and Maximum Capacity of 1,150 Liters per Minute

The Yanmar YDP40STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40STN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,300 Liters per Minute

The Yanmar YDP40TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40TN has Maximum Power Output of 10 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,750 Liters per Minute

The Zenit DG 75/2M50 is a Stainless-Steel Single-Phase Submersible Pump

It is Used for Pumping-Out Flooding Premises and Pumping From Wells or Tanks

The Zenit DG 75/2M50 has a 1 Horsepower Electric Motor That Can Provide a Maximum Head of 9.5 Meters and a Maximum Capacity of 360 Liters per Minute

The Zenit GR BluePro 200/2/G40H is a Three-Phase Submersible Grinder Pump

It is Mainly Used for Sewage and Wastewater Treatment Systems, Agriculture, Farming and Irrigation

It Features a Cast Iron Impeller and Casing with Double Mechanical Seal with an Electric Motor Output of 2 Horsepower Providing Maximum Head of 27 Meters and Maximum Capacity of 336 Liters per Minute

Calpeda MXHM 405 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 405 has a Power Output of 1.5 Horsepower,  a Maximum Head of 56.5 Meters, and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 50-1515 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings, and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems, and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1515 has 15 Stages with a Power Output of 15 Horsepower a Maximum Head of 217 Meters and a Maximum Capacity of 400 Liters per Minute

Tsurumi 50MG23.7 is a Three-Phase Submersible Sewage Pump with Semi-Vortex High Chrome Impeller. It is Used for Raw Sewage, Wastewater Treatment Systems and Industrial/Residence Systems.

The 50MG23.7 Maximum Power Output of 5 Horsepower Providing a Total Head of 35 Meters and Maximum Capacity of 320 Liters per Minute with a 2 Inch Discharge Port.

Tsurumi KTZ 22.2 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and High Chromium Iron Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5 mm Solid Handling Capabilities and 2 Inch Discharge Connection.

The KTZ 22.2 has a Power Output of 3 Horsepower That Provides a Maximum Head of 30 Meters and a Maximum Capacity of 490 Liters per Minute

The Calpeda MXHM 403 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The Calpeda MXHM 403 has a Power Output of 0.75 Horsepower a Maximum Head of 33 Meters and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 80-4802/C is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings, and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems, and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 80-4802/C has 2 Stages with a Power Output of 7.5 Horsepower a Maximum Head of 40.5 Meters and a Maximum Capacity of 1000 Liters per Minute

Tsurumi KTZ 35.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and High Chromium Iron Impeller.

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5 mm Solid Handling Capabilities and 3 Inch Discharge Connection.

The KTZ 35.5 has a Power Output of 7.5 Horsepower That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 870 Liters per Minute

The MPSUM 304 is a Single-Phase Vertical Close Coupled Multi-Stage Pump

The Pump's Shaft and Casings are All Made from Heavy Duty Stainless-Steel

Mainly Used for Civil and Industrial Applications, and Can Withstand Temperatures up to +35 °C

The MPSUM 304 has a Power Output of 0.75 Horsepower a Maximum Head of 44 Meters and a Maximum Capacity of 75 Liters per Minute

The Calpeda MXHM 202E is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The Calpeda MXHM 202 has a Power Output of 0.45 Horsepower a Maximum Head of 22 Meters and a Maximum Capacity of 80 Liters per Minute

Tsurumi NK4-22 is a Single-Phase Semi-Vortex Dewatering Pump That is Mainly Used in Construction, Aggregation and Mining Applications.

The NK4-22 has a Power Output of 3 Horsepower That Provides a Maximum Head of 26 Meters and a Maximum Capacity of 490 Liters per Minute with a 3 Inch Discharge Connection.

The Calpeda MXHM 805 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The Calpeda MXHM 805 has a Power Output of 2.5 Horsepower a Maximum Head of 60 Meters and a Maximum Capacity of 216 Liters per Minute