Calpeda

Calpeda CTM61 is a Single-Phase Close-Coupled Peripheral Pump with Turbine Impeller.

It Features a Cast Iron Casing, Brass Impeller, Casing Cover, and a Chrome Steel Shaft. Its primary uses are Water Supply, Increasing Network Pressure, Cooling and Air-Conditioning Systems, and Can Withstand Temperatures up to +60 °C

The CTM61 has a Power Output of 0.45 Horsepower, a Maximum Head of 41 Meters and a Maximum Capacity of 38 Liters per Minute

Calpeda GM10 is a Single-Phase Submersible Drainage Pump.

It is Made from Heavy Duty Rustproof Composite Polymers That are Resistant to Corrosion and Internal/External Strain

Its primary uses Draining Flooded Rooms or Tanks, Water Extraction from Ponds, and Irrigation. It Can Withstand Temperatures up to +35 °C

The GM10 has a Motor Output of 0.4 Horsepower, a Maximum Head of 7.5 Meters, a Maximum Capacity of 200 Liters per Minute and an Immersion Depth of 5 Meters

The Idromat 5-22 is a Regulation Device for Pump Control.

It is Used for Water Supply, Increase of Network Pressure and Protection Against Pump Dry Running.

Calpeda MPC 41 is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters and a Maximum Capacity of 350 Liters per Minute

Calpeda MPC 71/B is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 71/B has a Power Output of 3 Horsepower, a Maximum Head of 18 Meters, and a Maximum Capacity of 667 Liters per Minute

Calpeda MPCM 41 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters, and a Maximum Capacity of 350 Liters per Minute

Calpeda MPCM 61 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 61 has a Power Output of 2 Horsepower, a Maximum Head of 14 Meters, and a Maximum Capacity of 567 Liters per Minute

Calpeda MXHM 204 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 204 has a Power Output of 0.75 Horsepower has a Maximum Head of 45 Meters, and a Maximum Capacity of 80 Liters per Minute

The Varem UD0193FUS400/Calpeda MXHM 403 is Water Pump Booster System

It Extends The Pump's Life, Makes Less Noise, Quietens water Hammering and Cycling, and Gives More Consistent Flow Rate

In Addition, The Pressure Tank can be Used to Moderate the Water Flow to Match Hot Water Service or Air Conditioning Unit.

Calpeda MXHM 404 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 404 has a Power Output of 1 Horsepower, a Maximum Head of 44.5 Meters, and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 50-1504 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1504 has 4 Stages with a Power Output of 4 Horsepower a Maximum Head of 58 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1505 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1505 has 5 Stages with a Power Output of 5.5 Horsepower a Maximum Head of 72.5 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1510 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1510 has 10 Stages with a Power Output of 10 Horsepower a Maximum Head of 141 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1517 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1517 has 17 Stages with a Power Output of 20 Horsepower a Maximum Head of 245 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NGM 3/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 3/A has a Power Output of 0.75 Horsepower a Maximum Head of 49 Meters and a Maximum Capacity of 50 Liters per Minute

The Calpeda NGM 4/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 4/A has a Power Output of 1 Horsepower a Maximum Head of 41 Meters and a Maximum Capacity of 66.6 Liters per Minute

The Calpeda NGM 5/16E is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 5/16E has a Power Output of 1.5 Horsepower a Maximum Head of 59 Meters and a Maximum Capacity of 75 Liters per Minute

The Calpeda NM 11A/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 11A/A has a Power Output of 3 Horsepower a Maximum Head of 35.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 12A/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 12A/B has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 32/20A/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting, and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to 90 °C

The NM32/20A/A has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 250 Liters per Minute

The Calpeda NM 65/20B/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 65/20B/B has a Power Output of 25 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 2,200 Liters per Minute

The Calpeda NM 80/16C/C is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16C/C has a Power Output of 15 Horsepower a Maximum Head of 28.7 Meters and a Maximum Capacity of 3,000 Liters per Minute

The Calpeda NM 80/16E/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16E/B has Power Output of 10 Horsepower a Maximum Head of 21.5 Meters and a Maximum Capacity of 2,800 Liters per Minute

The Calpeda NMD 40/180C/A is a Close-Coupled Three-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMD 40/180C/A has a Power Output of 7.5 Horsepower a Maximum Head of 69 Meters and a Maximum Capacity of 400 Liters per Minute