Pumps

Calpeda CTM61 is a Single-Phase Close-Coupled Peripheral Pump with Turbine Impeller.

It Features a Cast Iron Casing, Brass Impeller, Casing Cover, and a Chrome Steel Shaft. Its primary uses are Water Supply, Increasing Network Pressure, Cooling and Air-Conditioning Systems, and Can Withstand Temperatures up to +60 °C

The CTM61 has a Power Output of 0.45 Horsepower, a Maximum Head of 41 Meters and a Maximum Capacity of 38 Liters per Minute

Calpeda GM10 is a Single-Phase Submersible Drainage Pump.

It is Made from Heavy Duty Rustproof Composite Polymers That are Resistant to Corrosion and Internal/External Strain

Its primary uses Draining Flooded Rooms or Tanks, Water Extraction from Ponds, and Irrigation. It Can Withstand Temperatures up to +35 °C

The GM10 has a Motor Output of 0.4 Horsepower, a Maximum Head of 7.5 Meters, a Maximum Capacity of 200 Liters per Minute and an Immersion Depth of 5 Meters 

The Idromat 5-22 is a Regulation Device for Pump Control.

It is Used for Water Supply, Increase of Network Pressure and Protection Against Pump Dry Running.

Calpeda MPC 41 is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters and a Maximum Capacity of 350 Liters per Minute

Calpeda MPC 71/B is a Three-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPC 71/B has a Power Output of 3 Horsepower, a Maximum Head of 18 Meters, and a Maximum Capacity of 667 Liters per Minute

Calpeda MPCM 41 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 41 has a Power Output of 1.5 Horsepower, a Maximum Head of 16.4 Meters, and a Maximum Capacity of 350 Liters per Minute

Calpeda MPCM 61 is a Single-Phase Self-Priming Swimming Pool Pump with Built-In Strainer.

It is Made from Heavy Duty Corrosion and Sand Erosion Resistant Plastic Materials, and a Stainless-Steel Diffuser

It is Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The MPCM 61 has a Power Output of 2 Horsepower, a Maximum Head of 14 Meters, and a Maximum Capacity of 567 Liters per Minute

Calpeda MXHM 204 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 204 has a Power Output of 0.75 Horsepower has a Maximum Head of 45 Meters, and a Maximum Capacity of 80 Liters per Minute

The Varem UD0193FUS400/Calpeda MXHM 403 is Water Pump Booster System

It Extends The Pump's Life, Makes Less Noise, Quietens water Hammering and Cycling, and Gives More Consistent Flow Rate

In Addition, The Pressure Tank can be Used to Moderate the Water Flow to Match Hot Water Service or Air Conditioning Unit.

Calpeda MXHM 404 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 404 has a Power Output of 1 Horsepower, a Maximum Head of 44.5 Meters, and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 50-1504 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1504 has 4 Stages with a Power Output of 4 Horsepower a Maximum Head of 58 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1505 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1505 has 5 Stages with a Power Output of 5.5 Horsepower a Maximum Head of 72.5 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1510 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1510 has 10 Stages with a Power Output of 10 Horsepower a Maximum Head of 141 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda MXV 50-1517 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1517 has 17 Stages with a Power Output of 20 Horsepower a Maximum Head of 245 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NGM 3/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 3/A has a Power Output of 0.75 Horsepower a Maximum Head of 49 Meters and a Maximum Capacity of 50 Liters per Minute

The Calpeda NGM 4/A is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 4/A has a Power Output of 1 Horsepower a Maximum Head of 41 Meters and a Maximum Capacity of 66.6 Liters per Minute

The Calpeda NGM 5/16E is a Single-Phase Close-Coupled Self-Priming Pump with Built-In Ejector

It Features a Casing and a Diffuser Plate that are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Drawing Water from a Well, Pressure Boosting Systems, Garden and Jet Washing and Can Withstand Temperatures up to 40 °C

The NGM 5/16E has a Power Output of 1.5 Horsepower a Maximum Head of 59 Meters and a Maximum Capacity of 75 Liters per Minute

The Calpeda NM 11A/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 11A/A has a Power Output of 3 Horsepower a Maximum Head of 35.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 12A/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NM 12A/B has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 280 Liters per Minute

The Calpeda NM 32/20A/A is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting, and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to 90 °C

The NM32/20A/A has a Power Output of 5.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 250 Liters per Minute

The Calpeda NM 65/20B/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 65/20B/B has a Power Output of 25 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 2,200 Liters per Minute

The Calpeda NM 80/16C/C is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16C/C has a Power Output of 15 Horsepower a Maximum Head of 28.7 Meters and a Maximum Capacity of 3,000 Liters per Minute

The Calpeda NM 80/16E/B is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, Lantern Bracket and an Impeller That is Made from Heavy Duty Cast Iron, and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Operate Within Temperatures Ranging from -10 °C to +90 °C

The NM 80/16E/B has Power Output of 10 Horsepower a Maximum Head of 21.5 Meters and a Maximum Capacity of 2,800 Liters per Minute

The Calpeda NMD 40/180C/A is a Close-Coupled Three-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMD 40/180C/A has a Power Output of 7.5 Horsepower a Maximum Head of 69 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NMD 40/180D/B is a Close-Coupled Three-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMD 40/180D/B a Power Output of 5.5 Horsepowerhas a Maximum Head of 60 Meters and a Maximum Capacity of 400 Liters per Minute

The Calpeda NMDM 20/140A/E is a Close-Coupled Single-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller, and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMDM 20/140A/E has a Power Output of 2 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 100 Liters per Minute

The Calpeda NMDM 20/140B/E is a Close-Coupled Single-Phase Centrifugal Pump with Back-to-Back Impellers

It Features a Casing and Lantern Bracket Made from Cast Iron a Brass Impeller, and Chrome-Nickel Steel Shaft

It is Mainly Used for Water Supply, Heating and Air-Conditioning, Cooling and Circulation Plants and Can Withstand Temperatures Between -10 °C to +90 °C

The NMDM 20/140A/E has a Power Output of 1.5 Horsepower a Maximum Head of 52 Meters and a Maximum Capacity of 60 Liters per Minute

The Calpeda NMM 17/GE is a Close-Coupled Single Impeller Single-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That are Made from Heavy Duty Cast Iron a Brass Impeller and Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to +90 °C

The NMM 17/GE has a Power Output of 2 Horsepower a Maximum Head of 12 Meters and a Maximum Capacity of 1,000 Liters per Minute

The Calpeda NMM/2A is a Single-Phase Close-Coupled Single Impeller Centrifugal Pump

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NMM2/A has a Power Output of 1 Horsepower a Maximum Head of 33.5 Meters and a Maximum Capacity of 100 Liters per Minute

The Calpeda NMM 2S/A is a Close-Coupled Single Impeller Single-Phase Centrifugal Pump

It Features a Casing and Lantern Bracket That is Made from Heavy Duty Cast Iron a Brass Impeller and Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling and Circulating Plants, Fire Fighting and Irrigarion and Can Withstand Temperatures Ranging from -10 °C to 90 °C

The NMM 2S/A has a Power Output of 0.75 Horsepower a Maximum Head of 31 Meters and a Maximum Capacity of 80 Liters per Minute

The Calpeda NMP 65/16E/A is a Self-Priming Three-Phase Centrifugal Pump with Built-In Strainer Used for Water Circulation in Swimming Pool Filtration Systems

It Features a Casing and Lantern Bracket Made from Cast Iron a Cast Iron Impeller and with Chrome-Nickel Steel Shaft and Can Withstand Temperatures up to +60 °C

The NMP 65/16F/A The NMP 65/16F/A has a Power Output of 7.5 Horsepower a Maximum Head of 20.5 Meters and a Maximum Capacity of 1,600 Liters per Minute

The Calpeda NMP 65/16F/B is a Self-Priming Three-Phase Centrifugal Pump with Built-In Strainer Used for Water Circulation in Swimming Pool Filtration Systems

It Features a Casing and Lantern Bracket Made from Cast Iron a Cast Iron Impeller and with Chrome-Nickel Steel Shaft and Can Withstand Temperatures up to +60 °C

The NMP 65/16F/B The NMP 65/16F/B has a Power Output of 5.5 Horsepower a Maximum Head of 18 Meters and a Maximum Capacity of 1,600 Liters per Minute

The Calpeda SPA 11 is a Single-Phase Single Impeller Self-Draining Whirlpool Pump

It is Made from Heavy Duty Plastic Materials, Corrosion and Sand Erosion Resistant and a Stainless-Steel Diffuser

It is Mainly Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The SPA 11 has a Power Output of 0.6 Horsepower a Maximum Head of 12 Meters and a Maximum Capacity of 216 Liters per Minute

The Calpeda SPAM 21/A is a Single-Phase Single Impeller Self-Draining Whirlpool Pump

It is Made from Heavy Duty Plastic Materials, Corrosion and Sand Erosion Resistant and a Stainless-Steel Diffuser

It is Mainly Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The SPAM 21/A has a Power Output of 0.75 Horsepower a Maximum Head of 14.5 Meters and a Maximum Capacity of 266 Liters per Minute

The Calpeda SPAM 31/A is a Single-Phase Single Impeller Self-Draining Whirlpool Pump

It is Made from Heavy Duty Plastic Materials, Corrosion and Sand Erosion Resistant and a Stainless-Steel Diffuser

It is Mainly Used for Water Circulation in Swimming Pool Filtration Systems and Can Withstand Temperatures Up to 60 °C

The SPAM 31/A has a Power Output of 1 Horsepower a Maximum Head of 16.1 Meters and a Maximum Capacity of 283 Liters per Minute

The Halm BUPA 25-6.0U130 is a Domestic Water Circulation Pump

It Features a Pump Body Made of Bronze a Ceramic Shaft and Polysulfone Plastic Impeller

It is Mainly Used for Drinking Water Circulation Systems, Heating Systems and Can Withstand Temperatures up to 110 °C

The Halm BUPA has a Maximum Power Output of 90 Watts Providing Maximum Head of 1.25 Meters and Maximum Capacity of 22 Liters per Minute

The Hitachi VCTI-KK10 is a Canned Type Submersible Electric Pump Motor

It is Mainly Used for Deep Well Pumps and Features a 6 Inch Motor Size with 10 Horsepower Output, Diameter of 140 Milimeters a Length of 760 Milimeters and a Total Weight of 58 Kilograms

The Hitachi VCTI-KK15 is a Canned Type Submersible Electric Pump Motor

It is Mainly Used for Deep Well Pumps and Features a 6 Inch Motor Size with 15 Horsepower Output, Diameter of 140 Milimeters a Length of 850 Milimeters and a Total Weight of 67 Kilograms

The Hitachi VCTI-KK20 is a Canned Type Submersible Electric Pump Motor

It is Mainly Used for Deep Well Pumps and Features a 6 Inch Motor Size with 20 Horsepower Output, Diameter of 140 Milimeters a Length of 800 Milimeters and a Total Weight of 62 Kilograms

The Kawamoto PSS2-205-0.06S2 is a Single-Phase Stainless-Steel Casting Corrosion-Resistant Circulation Pump

The Pump Casing and Impeller are Made from Stainless-Steel Casting (SCS13) and the Shaft is Made from Stainless Steel (AISI304) It is Used for Hot/Cold Water Circulation, Air-Conditioning, Pool & SPA Systems

It Can Withstand Temperatures between 0 °C and 90 °C with a 0.08 Horsepower TEFC Motor that Can Provide a Maximum Head of 4.5 Meters and a Maximum Capacity of 40 Liters per Minute

The Kawamoto PSS2-205-0.1S2 is a Single-Phase Stainless-Steel Casting Corrosion-Resistant Circulation Pump, the Pump Casing and Impeller are Made from Stainless-Steel Casting (SCS13) and the Shaft is Made from Stainless Steel (AISI304) It is Used for Hot/Cold Water Circulation, Air-Conditioning, Pool & SPA Systems

It Can Withstand Temperatures between 0 °C and 90 °C with a 0.15 Horsepower TEFC Motor that Can Provide a Maximum Head of 6.8 Meters and a Maximum Capacity of 50 Liters per Minute

The Mitsubishi MP050 is Self-Priming Petrol Centrifugal Pump Powered with a Mitsubishi GB13GPN Petrol Engine

The MP050 is Used for Pumping Clean or Muddy Water from a Tank or a Pond, Irrigation and Construction

It has a Power Output of 4 Horsepower a Maximum Head of 32 Meters and a Maximum Capacity of 630 Liters per Minute

The Mitsubishi MP080 is Self-Priming Petrol Centrifugal Pump Powered with a Mitsubishi GB18GPN Petrol Engine

The MP080 is Used for Pumping Clean or Muddy Water from a Tank or a Pond, Irrigation and Construction

It has a Power Output of 6 Horsepower a Maximum Head of 32 Meters and a Maximum Capacity of 1,150 Liters per Minute

The Tormac TN150-22-06 is a Multi-Stage Submersible Single Suction Centrifugal Pump

The Impeller and Diffuser are Made from Stainless-Steel (AISI316) While the Shaft is Made from Stainless-Steel (AISI329)

It is Mainly Used for Fountains, Irrigation, Pressure Boosting Systems and Farming and has a 6 Inch Bore Hole and 3 Inch Outlet Size with 6 Horsepower Motor Capable of Delivering Maximum Head of 69 Meters and Capacities Up to 466.6 Liters per Minute

The Tormac TN150-48-03 is a Multi-Stage Submersible Single Suction Centrifugal Pump

The Impeller and Diffuser are Made from Stainless-Steel (AISI316) While the Shaft is Made from Stainless-Steel (AISI329)

It is Mainly Used for Fountains, Irrigation, Pressure Boosting Systems and Farming and has a 6 Inch Bore Hole and 3 Inch Outlet Size with 7.5 Horsepower Motor Capable of Delivering Maximum Head of 40 Meters and Capacities Up to 1,000 Liters per Minute

The Tormac TN150-48-05 is a Multi-Stage Submersible Single Suction Centrifugal Pump

The Impeller and Diffuser are Made from Stainless-Steel (AISI316) While the Shaft is Made from Stainless-Steel (AISI329)

It is Mainly Used for Fountains, Irrigation, Pressure Boosting Systems and Farming and has a 6 Inch Bore Hole and 3 Inch Outlet Size with 10 Horsepower Motor Capable of Delivering Maximum Head of 67 Meters and Capacities Up to 1,000 Liters per Minute

The Tormac TN150-60-05 is a Multi-Stage Submersible Single Suction Centrifugal Pump

The Impeller and Diffuser are Made from Stainless-Steel (AISI316) While the Shaft is Made from Stainless-Steel (AISI329)

It is Mainly Used for Fountains, Irrigation, Pressure Boosting Systems and Farming and has a 6 Inch Bore Hole and 3 Inch Outlet Size with 12.5 Horsepower Motor Capable of Delivering Maximum Head of 66 Meters and Capacities Up to 1,333 Liters per Minute

The Tormac TN150-60-06 is a Multi-Stage Submersible Single Suction Centrifugal Pump

The Impeller and Diffuser are Made from Stainless-Steel (AISI316) While the Shaft is Made from Stainless-Steel (AISI329)

It is Mainly Used for Fountains, Irrigation, Pressure Boosting Systems and Farming and has a 6 Inch Bore Hole and 3 Inch Outlet Size with 15 Horsepower Motor Capable of Delivering Maximum Head of 81 Meters and Capacities Up to 1,333 Liters per Minute

The Tsurumi 100B42.2 is a Three-Phase Submersible Sewage Pump with Non-Clogging Canal Impeller Made from Grey Iron Casting

It is Used for Raw Sewage, Wastewater Treatment Systems and Industrial/Residence Systems and has a Maximum Power Output of 3 Horsepower Providing a Total Head of 16 Meters and Maximum Capacity of 1,500 Liters per Minute

The Tsurumi 100B45.5 is a Three-Phase Submersible Sewage Pump with Non-Clogging Canal Impeller Made from Grey Iron Casting

It is Used for Raw Sewage, Wastewater Treatment Systems and Industrial/Residence Systems and has a Maximum Power Output of 7.5 Horsepower Providing a Total Head of 26 Meters and Maximum Capacity of 2,080 Liters per Minute

The Tsurumi 100C43.7 is a Three-Phase Submersible Sewage Pump with Cutting Mechanism Semi-Open Single Channel Impeller Made from Grey Iron Casting with Tungesten Carbide Alloy Tip

It is Used for Raw Sewage, Wastewater Treatment Systems and Industrial/Residence Systems and has a Maximum Power Output of 5 Horsepower Providing Total Head of 16 Meters and Maximum Capacity of 1,700 Liters per Minute

The Tsurumi 100C45.5 is a Three-Phase Submersible Sewage Pump with Cutting Mechanism Semi-Open Single Channel Impeller Made from Grey Iron Casting with Tungesten Carbide Alloy Tip

It is Used for Raw Sewage, Wastewater Treatment Systems and Industrial/Residence Systems and has a Maximum Power Output of 7.5 Horsepower Providing Total Head of 18.1 Meters and Maximum Capacity of 2,290 Liters per Minute

The Tsurumi 50CA2.75 is a Three-Phase Automatic Submersible Cutter Pump That Features a Casing Made from Heavy Duty Gray Cast Iron and Gray Cast Iron with Tungesten Carbide Alloy Impeller

It is Mainly Used for Sewage and Waste Water Carrying Foreign Matters with 21mm Solid Handeling Capabilities and 2 Inch Discharge Connection

The 50CA2.75 has a 1 Horsepower Electric Motor That Provides a Maximum Head of 11.5 Meters and a Maximum Capacity of 335 Liters per Minute

The Tsurumi 50MG22.2 is a Three-Phase Submersible Sewage Grinder Pump with a Vortex Impeller Made from Gray Cast Iron

It is Used in Wastewater Treatment Plants, the High-Chromium Cast Iron Grinder is Highly Effective in Grinding Garbage, Rubber Goods, Plastic Bags and Fabrics

The 50MG22.2 has a Maximum Output of 3 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 320 Liters per Minute

The Tsurumi 50PUA2.4S is an Automatic Submersible Sewage Pump with a Vortex Impeller that is Made from Glass-Fiber Reinforced Resin and a Stainless-Steel Shaft

It has a 0.5 Horsepower Electric Motor that Can Provide a Maximum Head of 9.6 Meters and a Maximum Capacity of 270 Liters per Minute

The Tsurumi 50PUA2.75S is a Single-Phase Automatic Submersible Sewage Pump with a Vortex Impeller that is Made from Glass-Fiber Reinforced Resin and a Stainless-Steel Shaft

It has a 1 Horsepower Electric Motor that Can Provide a Maximum Head of 12.5 Meters and a Maximum Capacity of 360 Liters per Minute

The Tsurumi 50PUA2.4S is Single-Phase Automatic Submersible Sewage Pump with a Vortex Impeller that is Made from Glass-Fiber Reinforced Resin and a Stainless-Steel Shaft

It has a 0.5 Horsepower Electric Motor that Can Provide a Maximum Head of 9.6 Meters and a Maximum Capacity of 270 Liters per Minute

The Tsurumi 50PUW2.75S is a Single-Phase Auto-Alternation Submersible Sewage Pump with a Vortex Impeller that is Made from Glass-Fiber Reinforced Resin and a Stainless-Steel Shaft

It has a 1 Horsepower Electric Motor with a Maximum Head of 12.5 Meters and a Maximum Capacity of 360 Liters per Minute

The Tsurumi 50SQ2.75 is a Three-Phase Stainless-Steel Corrosion-Resistant Portable Submersible Pump with Vortex Impeller

It is Used for Corrosive Liquids Draining and has a 1 Horsepower Electric Motor that can Provide a Maximum Head of 14.5 Meters and a Maximum Capacity of 300 Liters per Minute

The Tsurumi HS2.4S is a Single-Phase Light-Duty Drainage Pump with Semi-Vortex Impeller Made from Urethane Rubber

It is Used for Drainage Applicaions, Stormwater and Sand Carrying Water and has an Electric Motor Output of 0.5 Horsepower Providing a Maximum Head of 12.2 Meters and a Maximum Capacity of 207 Liters per Minute

The Tsurumi HSZ2.75S is a Single-Phase Automatic Light-Duty Drainage Pump with Semi-Vortex Impeller Made from Urethane Rubber

It is Used for Drainage Applicaions, Stormwater and Sand Carrying Water and has an Electric Motor Output of 1 Horsepower Providing a Maximum Head of 18 Meters and Maximum Capacity of 230 Liters per Minute

The Tsurumi HSZ3.75S is a Single-Phase Automatic Light-Duty Drainage Pump with Semi-Vortex Impeller Made from Urethane Rubber

It is Used for Drainage Applicaions, Stormwater and Sand Carrying Water and has an Electric Motor Output of 1 Horsepower Providing a Maximum Head of 18 Meters and Maximum Capacity of 300 Liters per Minute

The Tsurumi KTZ 21.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 2 Inch Discharge Connection

The KTZ 21.5 Offers a 50 Meters Submersion Depth with a 2 Horsepower Electric Motor That Provides a Maximum Head of 21.9 Meters and a Maximum Capacity of 430 Liters per Minute

The Tsurumi KTZ 22.2 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 2 Inch Discharge Connection

The KTZ 22.2 Offers a 50 Meters Submersion Depth with a 3 Horsepower Electric Motor That Provides a Maximum Head of 26 Meters and a Maximum Capacity of 500 Liters per Minute

The Tsurumi KTZ 23.7 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 2 Inch Discharge Connection

The KTZ 23.7 Offers a 50 Meters Submersion Depth with a 5 Horsepower Electric Motor That Provides a Maximum Head of 37 Meters and a Maximum Capacity of 450 Liters per Minute

The Tsurumi KTZ 32.2 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 3 Inch Discharge Connection

The KTZ 32.250 Meters Submersion Depth with a 3 Horsepower Electric Motor That Provides a Maximum Head of 20.5 Meters and a Maximum Capacity of 800 Liters per Minute

The Tsurumi KTZ 33.7 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 3 Inch Discharge Connection

The KTZ 33.7 Offers a 50 Meters Submersion Depth with a 5 Horsepower Electric Motor That Provides a Maximum Head of 29 Meters and a Maximum Capacity of 900 Liters per Minute

The Tsurumi KTZ 35.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 3 Inch Discharge Connection

The KTZ 35.5 Offers a 50 Meters Submersion Depth with a 7.5 Horsepower Electric Motor That Provides a Maximum Head of 32 Meters and a Maximum Capacity of 1,100 Liters per Minute

The Tsurumi KTZ 411 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 411 Offers a 50 Meters Submersion Depth with a 15 Horsepower Electric Motor That Provides a Maximum Head of 49 Meters and a Maximum Capacity of 1,450 Liters per Minute

The Tsurumi KTZ 415 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 415 Offers a 50 Meters Submersion Depth with a 20 Horsepower Electric Motor That Provides a Maximum Head of 55 Meters and a Maximum Capacity of 2,000 Liters per Minute

The Tsurumi KTZ 43.7 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 8.5mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 43.7 Offers a 50 Meters Submersion Depth with a 5 Horsepower Electric Motor That Provides a Maximum Head of 18 Meters and a Maximum Capacity of 1,450 Liters per Minute

The Tsurumi KTZ 47.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 12mm Solid Handeling Capabilities and 4 Inch Discharge Connection

The KTZ 47.5 Offers a 50 Meters Submersion Depth with a 10 Horsepower Electric Motor That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 1,400 Liters per Minute

The Tsurumi KTZ 611 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 611 Offers a 50 Meters Submersion Depth with a 15 Horsepower Electric Motor That Provides a Maximum Head of 32.5 Meters and a Maximum Capacity of 2,440 Liters per Minute

The Tsurumi KTZ 615 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 615 Offers a 50 Meters Submersion Depth with a 20 Horsepower Electric Motor That Provides a Maximum Head of 40 Meters and a Maximum Capacity of 2,800 Liters per Minute

The Tsurumi KTZ 67.5 is a Three-Phase Electric Submersible Drainage Pump That Features a Casing Made from Heavy Duty Cast Iron a Stainless-Steel Shaft and Chromium Iron Casting Impeller

It is Mainly Used in Construction, Aggregation and Mining Applications, with 20mm Solid Handeling Capabilities and 6 Inch Discharge Connection

The KTZ 67.5 Offers a 50 Meters Submersion Depth with a 10 Horsepower Electric Motor That Provides a Maximum Head of 31 Meters and a Maximum Capacity of 2,040 Liters per Minute

Tsurumi NKZ-D3 is a Three-Phase Agitator Pump That is Mainly Used in Construction, Aggregation and Mining Applications.

The NKZ-D3 has a Power Output of 5 Horsepower That Provides a Maximum Head of 17 Meters and a Maximum Capacity of 1,540 Liters per Minute with a 3 Inch Discharge Connection.

The Varisco 150 DP250 is a Trailer Mounted Wellpoint Centrifugal Pump

It is Used in Construction, General Dewatering, Drainage, Emergency Applications and Pumping-Out Flooding Premises

The Varisco 150 DP250 is Powered by a 30 Horsepower Kirloskar Diesel Engine Which Provides a Maximum Head of 30 Meters and Maximum Capacity of 2,100 Gallon Per Minute

The Varisco 150 WLP250 is a Trailer Mounted Diesel Self-Priming Centrifugal Pump

It is Used in Construction, General Dewatering, Drainage, Emergency Applications and Pumping-Out Flooding Premises

The Varisco 150 WLP250 is Powered by a 30 Horsepower Kirloskar Diesel Engine Which Provides a Maximum Head of 27.5 Meters and Maximum Capacity of 1,500 Gallon Per Minute

The Wilson PR-Matic One is a Regulation Device for Pump Control

It is Used for Water Supply, Increase of Network Pressure, Protection Against Pump Dry Running

The Wilson WCIR25-6 is a Single-Phase Stainless-Steel Circulation Pump

It is Used for Hot/Cold Water Circulation, Air-Conditioning, Pool & SPA Systems

It has a Power Output of 93 W a Maximum Head of 6 Meters and a Maximum Capacity of 55 Liters per Minute

The Wilson WCPC-100 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-100 has a Power Output of 1 Horsepower a Maximum Head of 32 Meters and a Maximum Capacity of 110 Liters per Minute

The Wilson WCPC-150 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-150 has a Power Output of 1.5 Horsepower Providing a Maximum Head of 38 Meters and a Maximum Capacity of 120 Liters per Minute

The Wilson WCPC-200 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WCPC-200 has a Power Output of 2 Horsepower Providing a Maximum Head of 45 Meters and a Maximum Capacity of 135 Liters per Minute

The Wilson WM(S)H2-30 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-30 has a Power Output of 0.5 Horsepower a Maximum Head of 27 Meters and a Maximum Capacity of 58 Liters per Minute

The Wilson WM(S)H2-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-30 has a Power Output of 0.75 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 58 Liters per Minute

The Wilson WM(S)H2-60 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H2-60 has a Power Output of 1 Horsepower a Maximum Head of 50 Meters and a Maximum Capacity of 58 Liters per Minute

The Wilson WM(S)H4-30 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-30 has a Power Output of 1 Horsepower a Maximum Head of 27 Meters and a Maximum Capacity of 116.6 Liters per Minute

The Wilson WM(S)H4-40 is a Single-Phase Horizontal Multi-Stage Stainless-Steel Centrifugal Pump

It is Mainly Used for Water Supply Sytems, Heating and Air-Conditioning, and Irrigation and Can Withstand Temperatures Between -15 °C to +105 °C

The Wilson WM(S)H4-40 has a Power Output of 1 Horsepower a Maximum Head of 36 Meters and a Maximum Capacity of 117 Liters per Minute

The Wilson WPC-50 is a Single-Phase Centrifugal Pump

It Features a Housing Made from Heavy Duty Cast Iron a Brass Impeller and a Stainless-Steel Shaft

It is Mainly Used for Water Supply Sytems, Pressure Boosting Systems, Fire-Fighting Applications and Irrigation and Can Withstand Temperatures Up to +60 °C

The Wilson WPC-50 has a Power Output of 0.5 Horsepower a Maximum Head of 35 Meters and a Maximum Capacity of 35 Liters per Minute

The Wilson WPC-50 PR-Matic One is a Regulation Device for Pump Control

It is Used for Water Supply, Increase of Network Pressure, Protection Against Pump Dry Running

The Wilson WSPD-1.5DR is a Single-Phase Submersible Drainage Pump

It Features a Housing, an Impeller and a Shaft All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

The Wilson WSPD-1.5DR a Power Output of 1.5 Horsepower Providing a Maximum Head of 13.5 Meters and a Maximum Capacity of 350 Liters per Minute

The Wilson WSPS-2CB is a Single-Phase Submersible Grinder Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Sewage and Waste Water Carrying Forein Matters and Can Withstand Temperatures Up to +40 °C

The Wilson WSPS-2CB has a Power Output of 2 Horsepower Providing a Maximum Head of 11.5 Meters and a Maximum Capacity of 350 Liters per Minute

The Wilson WSPS-2VOR is a Single-Phase Submersible Vortex Pump

It Features a Casing, a Housing, an Impeller and a Shaft that All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Seawater Transfer Systems and Can Withstand Temperatures Up to +40 °C

The Yanmar YDP20N is a Diesel Self-Priming Fresh Water Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Agricultural Fields

The YDP20N has Maximum Power Output of 4.7 Horsepower Providing Total Head of 32 Meters and Maximum Capacity of 550 Liters per Minute

The Yanmar YDP30STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30STN has Maximum Power Output of 4.7 Horsepower Providing Total Head of 23 Meters and Maximum Capacity of 850 Liters per Minute

The Yanmar YDP30TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP30TN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 27 Meters and Maximum Capacity of 1,150 Liters per Minute

The Yanmar YDP40STN is a Diesel Self-Priming Semi-Trash Pump that Features an Aluminum Cast Casing and Cast Iron Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40STN has Maximum Power Output of 6.5 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,300 Liters per Minute

The Yanmar YDP40TN is a Diesel Self-Priming Trash Pump that Features an Aluminum Cast Casing and Steel Cast Impeller

It is Used in Construction, Irrigation and Flood Control

The YDP40TN has Maximum Power Output of 10 Horsepower Providing Total Head of 25 Meters and Maximum Capacity of 1,750 Liters per Minute

The Zenit DG 75/2M50 is a Stainless-Steel Single-Phase Submersible Pump

It is Used for Pumping-Out Flooding Premises and Pumping From Wells or Tanks

The Zenit DG 75/2M50 has a 1 Horsepower Electric Motor That Can Provide a Maximum Head of 9.5 Meters and a Maximum Capacity of 360 Liters per Minute

The Zenit GR BluePro 200/2/G40H is a Three-Phase Submersible Grinder Pump

It is Mainly Used for Sewage and Wastewater Treatment Systems, Agriculture, Farming and Irrigation

It Features a Cast Iron Impeller and Casing with Double Mechanical Seal with an Electric Motor Output of 2 Horsepower Providing Maximum Head of 27 Meters and Maximum Capacity of 336 Liters per Minute

The Calpeda B-NM 50/200/B/C is a Close-Coupled Single Impeller Three-Phase Centrifugal Pump with Flanged Connections

It Features a Casing, a Lantern Bracket, and an Impeller That are Made from Heavy Duty Bronze and a Stainless-Steel Shaft

It is Mainly Used for Water Supply, Heating, Air-Conditioning, Cooling, Circulating Plants, Fire Fighting, and Irrigation and Can Operate Within Temperatures Ranging from -10 °C to 90 °C

The B-NM 50/200/B/C has a Power Output of 12.5 Horsepower a Maximum Head of 57.5 Meters and a Maximum Capacity of 280 Liters per Minute

Calpeda MXHM 405 is a Single-Phase Horizontal Multi-Stage Close-Coupled Pump.

It Features a Casing, an Impeller, and a Shaft That is All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply, Domestic Use, Civil and Industrial Applications, Garden and Irrigation and Can Withstand Temperatures Ranging from -15 °C to 110 °C

The MXHM 405 has a Power Output of 1.5 Horsepower,  a Maximum Head of 56.5 Meters, and a Maximum Capacity of 133 Liters per Minute

The Calpeda MXV 50-1515 is a Three-Phase Vertical Multi-Stage In-Line Pump

The Pump's Shaft, Impeller, Casings, and Covers are All Made from Heavy Duty Stainless-Steel

It is Mainly Used for Water Supply Systems, Pressure Boosting Systems, Fire-Extinguishing Systems, and Irrigation and Can Withstand Temperatures Ranging Between -15 °C to +120 °C

The MXV 50-1515 has 15 Stages with a Power Output of 15 Horsepower a Maximum Head of 217 Meters and a Maximum Capacity of 400 Liters per Minute